June 2014
Agency for Healthcare Research and Quality
Center for Financing, Access, and Cost Trends
540 Gaither Road
Rockville, MD 20850
(301) 427-1406
Table of Contents
A. Data Use Agreement
B. Background
1.0 Household Component
2.0 Medical Provider Component
3.0 Survey Management and Data Collection
C. Technical and Programming Information
1.0 General Information
2.0 Data File Information
2.1 Codebook Structure
2.2 Reserved Codes
2.3 Codebook Format
2.4 Variable Source and Naming Conventions
2.4.1 Variable-Source Crosswalk
2.4.2 Expenditure and Source of Payment Variables
2.5 File Contents
2.5.1 Survey Administration Variables
2.5.1.1 Person Identifiers (DUID, PID, DUPERSID)
2.5.1.2 Record Identifiers (EVNTIDX, FFEEIDX)
2.5.1.3 Round Indicator (EVENTRN)
2.5.1.4 Panel Indicator (PANEL)
2.5.2 Other Medical Type Variables (OMTYPEX, OMTYPE, OMOTHOX, OMOTHOS)
2.5.3 Flat Fee Variables (FFEEIDX, FFOMTYPE, FFBEF12, FFTOT13)
2.5.3.1 Definition of Flat Fee Payments
2.5.3.2 Flat Fee Variable Descriptions
2.5.3.2.1 Flat Fee ID (FFEEIDX)
2.5.3.2.2 Flat Fee Type (FFOMTYPE)
2.5.3.2.3 Counts of Flat Fee Events that Cross Years (FFBEF12, FFTOT13)
2.5.3.3 Caveats of Flat Fee Groups
2.5.4 Condition, Procedure, and Clinical Classification Codes
2.5.5 Expenditure Data
2.5.5.1 Definition of Expenditures
2.5.5.2 Data Editing and Imputation Methodologies of Expenditure Variables
2.5.5.2.1 General Data Editing Methodology
2.5.5.2.2 Imputation Methodologies
2.5.5.2.3 Other Medical Expenses Data Editing and Imputation
2.5.5.3 Imputation Flag Variable (IMPFLAG)
2.5.5.4 Flat Fee Expenditures
2.5.5.5 Zero Expenditures
2.5.5.6 Sources of Payment
2.5.5.7 Other Medical Expenditure Variables (OMSF12X-OMTC12X)
2.5.5.8 Rounding
3.0 Sample Weight (PERWT12F)
3.1 Overview
3.2 Details on Person Weight Construction
3.2.1 MEPS Panel 16 Weight Development Process
3.2.2 MEPS Panel 17 Weight Development Process
3.2.3 The Final Weight for 2012
3.2.4 Coverage
3.3 Using MEPS Data for Trend Analysis
4.0 Strategies for Estimation
4.1 Basic Estimates of Utilization, Expenditures, and Sources of Payment
4.1.1 Type of Records on File (OMTYPEX)
4.2 Variables with Missing Values
4.3 Variance Estimation (VARPSU, VARSTR)
5.0 Merging/Linking MEPS Data Files
5.1 Linking to the Person-Level File
5.2 Linking to the Prescribed Medicines File
5.3 Linking to the Medical Conditions File
References
D. Variable-Source Crosswalk
Individual identifiers have been removed from the
micro-data contained in these files. Nevertheless, under Sections 308 (d) and
903 (c) of the Public Health Service Act (42 U.S.C. 242m and 42 U.S.C. 299 a-1),
data collected by the Agency for Healthcare Research and Quality (AHRQ) and/or
the National Center for Health Statistics (NCHS) may not be used for any purpose
other than for the purpose for which they were supplied; any effort to determine
the identity of any reported cases is prohibited by law.
Therefore in accordance with the above referenced
Federal Statute, it is understood that:
- No one is to use the data in this data set in any way except
for statistical reporting and analysis; and
- If the identity of any person or establishment should be
discovered inadvertently, then (a) no use will be made of this
knowledge, (b) the Director Office of Management AHRQ will be
advised of this incident, (c) the information that would
identify any individual or establishment will be safeguarded or
destroyed, as requested by AHRQ, and (d) no one else will be
informed of the discovered identity; and
- No one will attempt to link this data set with individually
identifiable records from any data sets other than the Medical
Expenditure Panel Survey or the National Health Interview
Survey.
By using these data you signify your agreement to
comply with the above stated statutorily based requirements with the knowledge
that deliberately making a false statement in any matter within the jurisdiction
of any department or agency of the Federal Government violates Title 18 part 1
Chapter 47 Section 1001 and is punishable by a fine of up to $10,000 or up to 5
years in prison.
The Agency for Healthcare Research and Quality
requests that users cite AHRQ and the Medical Expenditure Panel Survey as the
data source in any publications or research based upon these data.
Return To Table Of Contents
The Medical Expenditure Panel Survey (MEPS) provides
nationally representative estimates of health care use, expenditures, sources of
payment, and health insurance coverage for the U.S. civilian
non-institutionalized population. The MEPS Household Component (HC) also
provides estimates of respondents’ health status, demographic and socio-economic
characteristics, employment, access to care, and satisfaction with health care.
Estimates can be produced for individuals, families, and selected population
subgroups. The panel design of the survey, which includes 5 Rounds of interviews
covering 2 full calendar years, provides data for examining person-level changes
in selected variables such as expenditures, health insurance coverage, and
health status. Using computer assisted personal interviewing (CAPI) technology,
information about each household member is collected, and the survey builds on
this information from interview to interview. All data for a sampled household
are reported by a single household respondent.
The MEPS-HC was initiated in 1996. Each year a new
panel of sample households is selected. Because the data collected are
comparable to those from earlier medical expenditure surveys conducted in 1977
and 1987, it is possible to analyze long-term trends. Each annual MEPS-HC sample
size is about 15,000 households. Data can be analyzed at either the person or
event level. Data must be weighted to produce national
estimates.
The set of households selected for each panel of the
MEPS HC is a subsample of households participating in the previous year’s
National Health Interview Survey (NHIS) conducted by the National Center for
Health Statistics. The NHIS sampling frame provides a nationally representative
sample of the U.S. civilian non-institutionalized population and reflects an
oversample of Blacks and Hispanics. In 2006, the NHIS implemented a new sample
design, which included Asian persons in addition to households with Black and
Hispanic persons in the oversampling of minority populations. MEPS further
oversamples additional policy relevant sub-groups such as low income households.
The linkage of the MEPS to the previous year’s NHIS provides additional data for
longitudinal analytic purposes.
Return To Table Of Contents
Upon completion of the household CAPI interview and
obtaining permission from the household survey respondents, a sample of medical
providers are contacted by telephone to obtain information that household
respondents can not accurately provide. This part of the MEPS is called the
Medical Provider Component (MPC) and information is collected on dates of visit,
diagnosis and procedure codes, charges and payments. The Pharmacy Component
(PC), a subcomponent of the MPC, does not collect charges or diagnosis and
procedure codes but does collect drug detail information, including National
Drug Code (NDC) and medicine name, as well as date filled and sources and
amounts of payment. The MPC is not designed to yield national estimates. It is
primarily used as an imputation source to supplement/replace household reported
expenditure information.
Return To Table Of Contents
MEPS HC and MPC data are collected under the authority
of the Public Health Service Act. Data are collected under contract with Westat,
Inc. (MEPS HC) and Research Triangle Institute (MEPS MPC). Data sets and summary
statistics are edited and published in accordance with the confidentiality
provisions of the Public Health Service Act and the Privacy Act. The National
Center for Health statistics (NCHS) provides consultation and technical
assistance.
As soon as data collection and editing are completed,
the MEPS survey data are released to the public in staged releases of summary
reports, micro data files, and tables via the MEPS Web site:
meps.ahrq.gov.
Selected data can be analyzed through MEPSnet, an on-line interactive tool
designed to give data users the capability to statistically analyze MEPS data in
a menu-driven environment.
Additional information on MEPS is available from the
MEPS project manager or the MEPS public use data manager at the Center for
Financing, Access, and Cost Trends, Agency for Healthcare Research and Quality,
540 Gaither Road, Rockville, MD 20850 (301-427-1406).
Return To Table Of Contents
This documentation describes one in a series of public
use event files from the 2012 Medical Expenditure Panel Survey (MEPS) Household
Component (HC). Released as an ASCII data file (with related SAS, SPSS, and
Stata programming statements) and a SAS transport file, the 2012 Other Medical
Expenses public use event file provides information on the purchases of and
expenditures for visual aids, medical equipment, supplies, and other medical
items for a nationally representative sample of the civilian
noninstitutionalized population of the United States. Data from the Other
Medical event file can be used to make estimates of the Other Medical event
expenditures associated with medical items for calendar year 2012. The purchase
of medical equipment, supplies, and other medical items is based entirely on
household reports. They were not included in the Medical Provider Component
(MPC); therefore, all expenditure and payment data on the Other Medical event
file are reported by the household.
This file contains 31 variables and has a logical
record length of 222 with an additional 2-byte carriage return/line feed at the
end of each record. As illustrated below, this file consists of MEPS survey data
obtained in the 2012 portion of Round 3, and Rounds 4 and 5 for Panel 16, as
well as Rounds 1, 2, and the 2012 portion of Round 3 for Panel 17 (i.e., the
rounds for the MEPS panels covering calendar year 2012).
The Other Medical event file contains one record for
each type of medical item reported as being purchased or otherwise obtained by a
household member during the specified reference period. It should be noted that
reference periods for reporting expenditures vary by type of medical item
obtained. Expenditure data for visual aids are collected during Rounds 3, 4, and
5 of Panel 16 and Rounds 1, 2, and 3 of Panel 17. Therefore, each round is a
reference period for purchases of visual aids. Expenditure data for other
medical items, which include ambulance services, orthopedic items, hearing
devices, prostheses, bathroom aides, medical equipment, disposable supplies, and home alterations, are collected only
in Round 5 (Panel 16) and Round 3 (Panel 17); for these items, the reference period is the entire year. A record can
represent one or more purchases of an item or service during a reference period. For example, expenditures for glasses
and contact lenses are asked every round. If a respondent reported an expense of $400 for glasses and/or contact
lenses in Round 2, it is unknown if the person purchased one or more pair of glasses
and/or contact lenses during that round. Similarly, if $800 were spent for
ambulance services (which has a reference period of a year), it is not known if
the person used an ambulance once or more than once during the year.
Following is a summary of other medical expense
categories included in this file:
Other medical events in file collected every round
- Glasses and contact lenses
Other medical events in file collected once a year
- Ambulance services
- Orthopedic items (such as corrective shoes or inserts, braces, crutches, canes, walkers, wheelchairs, and scooters)
- Hearing devices (such as hearing aids, amplifiers for a telephone, adaptive speech equipment, and speech synthesizers)
- Prostheses (such as artificial limbs)
- Bathroom aids (such as portable commodes, raised toilet seats, portable tub seats, and handrails)
- Medical equipment (such as hospital beds, lifts, monitors, special chairs, oxygen, bed pans, adaptive feeding equipment,
vaporizers or nebulizers, and blood pressure monitors)
- Disposable supplies (such as ostomy supplies, bandages, dressings, tape, diapers, catheters, syringes, and IV supplies)
- Home alterations and modifications (such as ramps, handrails, elevators, and automobile modifications)
- Any other medical item
Records for purchases of insulin and diabetic supplies
in a round were included in the Other Medical Expenses event files for
1996-2004. Beginning with the 2005 file, it was decided to exclude these records
from the Other Medical Expenses event file since the expenditures have always
been included on the Prescribed Medicines file. The Prescribed Medicines file is
a more appropriate source for estimates of both utilization and expenditures for
insulin and diabetic supplies. As a consequence, there are no records on this
file where the variable OMTYPEX = 2 or 3 (the values used in 1996-2004 to
identify records for purchases of insulin and diabetic supplies, respectively).
Data from this event file can be merged with other
2012 MEPS HC data files for the purpose of appending person-level data, such as
demographic characteristics or health insurance coverage, to each other medical
record.
This file can also be used to construct summary
variables of expenditures, source of payment, and related aspects of the
purchase of medical items. Aggregate annual person-level information on
expenditures for other medical equipment is provided on the MEPS 2012 Full-Year
Consolidated Data File where each record represents a MEPS sampled person. This
aggregate information is provided for vision aids only and not other types of
other medical equipment.
The following documentation offers a brief overview of
the types and levels of data provided, and the content and structure of the
files and the codebook. It contains the following sections:
Data File Information
Sample Weights
Strategies for Estimation
Merging/Linking MEPS Data Files
References
Variable - Source Crosswalk
For more information on MEPS HC survey design, see T.
Ezzati-Rice, et al. (1998-2007) and S. Cohen, 1996. A copy of the MEPS HC survey
instrument used to collect the information on the dental file is available on
the MEPS Web site at the following address:
meps.ahrq.gov.
Return To Table Of Contents
The 2012 Other Medical Expenses public use data set
consists of one event-level data file. The file contains characteristics
associated with the Other Medical event and imputed expenditure data.
The 2012 Other Medical Expenses public use data set
contains 6,287 other medical (OM) expenditure records; of these records, 6,128
are associated with persons having a positive person-level weight (PERWT12F).
This file includes records for all household members who resided in eligible
responding households and were reported to have purchased or otherwise obtained
at least one type of medical item such as medical equipment, glasses, hearing
devices, etc. during calendar year 2012. Some persons may have been reported to
have obtained more than one type of medical item and, therefore, have several
records on this file. On the other hand, persons who were not reported to
have obtained a medical item in 2012 have no records on this file. These data
were collected during the 2012 portion of Round 3, and Rounds 4 and 5 for Panel
16, as well as Rounds 1, 2, and the 2012 portion of Round 3 for Panel 17 of the
MEPS HC. The persons represented on this file had to meet either (a) or (b)
below:
- Be classified as a key in-scope person who responded for his or her entire period of 2012 eligibility (i.e., persons with a
positive 2012 full-year person-level weight (PERWT12F > 0)), or
- Be an eligible member of a family all of whose key in-scope members have a positive person-level weight (PERWT12F > 0).
(Such a family consists of all persons with the same value for
FAMIDYR.) That is, the person must have a positive full-year
family-level weight (FAMWT12F > 0). Note that FAMIDYR and
FAMWT12F are variables on the 2012 Full Year Consolidated Data
File.
Persons with no other medical events for 2012 are not
included on this event-level OM file but are represented on the person-level
2012 Full-Year Population Characteristics file.
Each record includes the following: type of medical
item obtained, flat fee information, imputed sources of payment, total payment
and total charge for the medical item, and a full-year person-level weight.
To append person-level information such as demographic
or health insurance coverage to each event record, data from this file can be
merged with 2012 MEPS HC person-level data (e.g. Full-Year Consolidated or
Full-Year Population Characteristics files) using the person identifier,
DUPERSID. Please see Section 5.0 for details on how to merge MEPS data files.
Return To Table Of Contents
For most variables on the Other Medical Expenses event
file, both weighted and unweighted frequencies are provided in the accompanying
codebook. The exceptions to this are weight variables and variance estimation
variables. Only unweighted frequencies of these variables are included in the
accompanying codebook file. See the Weights Variables list in section D,
Variable-Source Crosswalk.
The codebook and data file sequence list variables in
the following order:
Unique person identifier
Unique other medical expenses identifier
Type of other medical expenses
Imputed expenditure variables
Weight and variance estimation variables
Note that the person identifier is unique within this data year.
Return To Table Of Contents
The following reserved code values are used:
Value |
Definition |
-1 INAPPLICABLE |
Question was not asked
due to skip pattern |
-7 REFUSED |
Question was asked and
respondent refused to answer question |
-8 DK |
Question was asked and
respondent did not know answer |
-9 NOT ASCERTAINED |
Interviewer did not
record the data |
Generally, values of -1, -7, -8, and -9 for
non-expenditure variables have not been edited on this file. The values of -1
and -9 can be edited by the data users/analysts by following the skip patterns
in the HC survey questionnaire (located on the MEPS Web site:
meps.ahrq.gov/survey_comp/survey_questionnaires.jsp).
Return To Table Of Contents
The codebook describes an ASCII data set (although the
data are also being provided in a SAS transport file). The following codebook
items are provided for each variable:
Identifier |
Description |
Name |
Variable name (maximum
of 8 characters) |
Description |
Variable descriptor
(maximum of 40 characters) |
Format |
Number of bytes |
Type |
Type of data: numeric
(indicated by NUM) or character (indicated by
CHAR) |
Start |
Beginning column
position of variable in record |
End |
Ending column position
of variable in record |
Return To Table Of Contents
In general, variable names reflect the content of the
variable, with an eight-character limitation. All imputed/edited variables end
with an “X”.
Return To Table Of Contents
Variables were derived from the HC survey
questionnaire or from the CAPI. The source of each variable is identified in
Section D “Variable - Source Crosswalk” in one of four ways:
- Variables derived from CAPI or assigned in sampling are so
indicated as “CAPI derived” or “Assigned in sampling,” respectively;
- Variables which come from one or more specific questions
have those questionnaire sections and question numbers indicated
in the “Source” column; questionnaire sections are identified as:
- EV – Event Roster section
- FF – Flat Fee section
- CP – Charge Payment section
- Variables constructed from multiple questions using complex
algorithms are labeled “Constructed” in the “Source” column; and
- Variables that have been edited or imputed are so indicated.
Return To Table Of Contents
The names of the expenditure and source of payment
variables follow a standard convention, are seven characters in length, and end
in an “X” indicating edited/imputed. Please note that imputed means that a
series of logical edits, as well as an imputation process to account for missing
data, have been performed on the variable.
The total sum of payments and 12 source of payment
variables are named in the following way:
The first two characters indicate the type of event:
IP - inpatient stay
ER - emergency room visit
HH - home health visit
OM - other medical equipment
OB - office-based visit
OP - outpatient visit
DV - dental visit
RX - prescribed medicine
In the case of the source of payment variables, the
third and fourth characters indicate:
SF - self or family
MR - Medicare
MD - Medicaid
PV - private insurance
VA - Veterans Administration/CHAMPVA
TR - TRICARE
OF - other Federal Government
SL - State/local government
WC - Workers’ Compensation
OT - other insurance
OR - other private
OU - other public
XP - sum of payments
In addition, the total charge variable is indicated by
TC in the variable name.
The fifth and sixth characters indicate the year (12).
The seventh character, “X”, indicates whether the variable is edited/imputed.
For example, OMSF12X is the edited/imputed amount paid
by self or family for 2012 other medical equipment and expenditures.
Return To Table Of Contents
The dwelling unit ID (DUID) is a five-digit random
number assigned after the case was sampled for MEPS. The three-digit person
number (PID) uniquely identifies each person within the dwelling unit. The
eight-character variable DUPERSID uniquely identifies each person represented on
the file and is the combination of the variables DUID and PID. For detailed
information on dwelling units and families, please refer to the documentation
for the 2012 Full-Year Population Characteristics File.
Return To Table Of Contents
EVNTIDX uniquely identifies each other medical expense
event (i.e., each record on the OME file) and is the variable required to link
other medical events to data files containing details on prescribed medicines
(MEPS 2012 Prescribed Medicines File). For details on linking, see Section 5.0,
or the MEPS 2012 Appendix File, HC-152I.
FFEEIDX is a constructed variable that uniquely
identifies a flat fee group, that is, all events that were part of a flat fee
payment. FFEEIDX identifies a flat fee payment that was identified using
information from the Household Component.
Return To Table Of Contents
EVENTRN indicates the round in which the other medical
event was reported. For most types of other medical expenditures on this file,
data were collected only in Round 5 for Panel 16 and Round 3 for Panel 17; each
record represents a summary of expenditures for items purchased or otherwise
obtained for 2012. There is one exception:
Expenditure data for the purchase of glasses and/or
contact lenses were collected in Rounds 3, 4, and 5 for Panel 16 and Rounds 1,
2, and 3 for Panel 17. For vision items purchased in Panel 17 Round 3, it could
not be determined if the purchases occurred in 2012 or 2013. Therefore, records
with expenses reported in Round 3 were only included if the number of purchases
in 2012 was greater than or equal to the number of purchases in 2013.
Return To Table Of Contents
PANEL is a constructed variable used to specify the
panel number for the person. PANEL will indicate either Panel 16 or Panel 17 for
each person on the file. Panel 16 is the panel that started in 2011, and Panel
17 is the panel that started in 2012.
Return To Table Of Contents
Other medical expenditures (OMTYPE) include
glasses or contact lenses, ambulance services, orthopedic items, hearing
devices, prostheses, bathroom aids, medical equipment, disposable supplies, and
alterations/modifications (to homes). When the interviewer did not know
how to categorize types of medical item expenditures, these items were specified
in the variable OMOTHOS (OMTYPE other specify). As a part of the editing
process, other medical expenditures identified in OMOTHOS have been edited to
appropriate OMTYPE categories. The edited (OMTYPEX, OMOTHOX) and unedited
(OMTYPE, OMOTHOS) versions of both of these variables are included on this file.
Records for purchases of insulin and diabetic supplies
in a round were included in the Other Medical Expenses event files for
1996-2004. Beginning with the 2005 file, it was decided to exclude these records
from the Other Medical Expenses event file since the expenditures have always
been included on the Prescribed Medicines file. The Prescribed Medicines file is
a more appropriate source for estimates of both utilization and expenditures for
insulin and diabetic supplies. As a consequence, there are no records on this
file where the variable OMTYPEX = 2 or 3 (the values used in 1996-2004 to
identify records for purchases of insulin and diabetic supplies, respectively).
Other Medical Expenses
Event File 1996- 2004 (OMTYPEX) |
Other Medical Expenses
Event File 2005 and later (OMTYPEX) |
1 = Glasses or Contact Lenses |
1 = Glasses or Contact
Lenses |
2 = Insulin |
2 = not used |
3 = Diabetic
Equipment/Supplies |
3 = not used |
4 = Ambulance Services |
4 = Ambulance Services |
5 = Orthopedic Items |
5 = Orthopedic Items |
6 = Hearing Devices |
6 = Hearing Devices |
7 = Prosthesis |
7 = Prosthesis |
8 = Bathroom Aids |
8 = Bathroom Aids |
9 = Medical Equipment |
9 = Medical Equipment |
10 = Disposable
Supplies |
10 = Disposable
Supplies |
11 =
Alterations/modifications |
11 =
Alterations/modifications |
91 = Other |
91 = Other |
Return To Table Of Contents
A flat fee is the fixed dollar amount a person is
charged for a package of services provided during a defined period of time. A
flat fee group is the set of medical services that are covered under the same
flat fee payment. The flat fee groups represented on the Other Medical Expenses
event file include flat fee groups where at least one of the other medical
events, as reported by the HC respondent, occurred during 2012. By definition, a
flat fee group can span multiple years. Furthermore, a single person can have
multiple flat fee groups.
Return To Table Of Contents
As noted earlier in Section 2.5.1.2 “Record
Identifiers,” the variable FFEEIDX uniquely identifies all events that are part
of the same flat fee group for a person. On any 2012 MEPS event file, every
event that is part of a specific flat fee group will have the same value for
FFEEIDX. Note that prescribed medicine and home health events are never included
in a flat fee group and none of the flat fee variables are on those event files.
Return To Table Of Contents
FFOMTYPE indicates whether the 2012 other medical
expenditure is the “stem” or “leaf” of a flat fee group. A stem (records with
FFOMTYPE = 1) is the initial other medical service event, which is followed by
other medical expense events that are covered under the same flat fee payment.
The leaves of the flat fee group (records with FFOMTYPE = 2) are those other
medical events that are tied back to the initial event (the stem) in the flat
fee group. These “leaf” records have their expenditure variables set to zero.
For the other medical events that are not part of a flat fee payment, the
FFOMTYPE is set to -1, “INAPPLICABLE”.
Return To Table Of Contents
As described in Section 2.5.3.1, a flat fee payment
covers multiple events and the multiple events could span multiple years. For
situations where the medical item was obtained in 2012 as part of a group of
events, and some of the events occurred before or after 2012, counts of the
known events are provided on the other medical record.
Variables that indicate events occurring before or
after 2012 are the following:
FFBEF12 – indicates total number of 2011 events in the
same flat fee group as the medical item that was obtained in 2012. This count
would not include the medical item obtained in 2012.
FFTOT13 – indicates the number of 2013 medical events,
including the purchase of any additional medical items, expected to be in the
same flat fee group as the medical item obtained in 2012.
Return To Table Of Contents
Data users/analysts should note that flat fee payments
are not common on the Other Medical Expenses file. There are 9 records that are
identified as being part of a flat fee payment group. In general, every flat fee
group should have an initial visit (stem) and at least one subsequent visit
(leaf). There are some situations where this is not true. For some of these flat
fee groups, the initial visit reported occurred in 2012, but the remaining
visits that were part of this flat fee group occurred in 2013. In this case, the
2012 flat fee group represented on this file would consist of one event (the
stem). The 2013 “leaf events” that are part of this flat fee group are not
represented on the file. Similarly, the household respondent may have reported a
flat fee group where the initial visit began in 2011 but subsequent visits
occurred during 2012. In this case, the initial visit would not be represented
on the file. This 2012 flat fee group would then only consist of one or more
leaf records and no stem. Please note that the crosswalk in this document lists
all possible flat fee variables.
Return To Table Of Contents
Conditions data are not collected for Other Medical
events; therefore, this file cannot be linked to the Conditions File.
Expenditures on this file refer to what is paid for
the medical item. More specifically, expenditures in MEPS are defined as the sum
of payments for each medical item that was obtained, including out-of-pocket
payments and payments made by private insurance, Medicaid, Medicare and other
sources. The definition of expenditures used in MEPS differs slightly from its
predecessors: the 1987 NMES and 1977 NMCES surveys where “charges” rather than
sum of payments were used to measure expenditures. This change was adopted
because charges became a less appropriate proxy for medical expenditures during
the 1990s due to the increasingly common practice of discounting. Although
measuring expenditures as the sum of payments incorporates discounts in the MEPS
expenditure estimates, these estimates do not incorporate any payment not
directly tied to specific medical care events, such as bonuses or retrospective
payment adjustments paid by third party payers. Another general change from the
two prior surveys is that charges associated with uncollected liability, bad
debt, and charitable care (unless provided by a public clinic or
hospital) are not counted as expenditures because there are no payments
associated with those classifications. While charge data are provided on this
file, data users/analysts should use caution when working with these data
because a charge does not typically represent actual dollars exchanged for
services or the resource costs of those services, nor are they directly
comparable to the expenditures defined in the 1987 NMES. For details on
expenditure definitions, please refer to the following, “Informing American
Health Care Policy” (Monheit et al., 2000). AHRQ has developed factors to apply
to the 1987 NMES expenditure data to facilitate longitudinal analysis. These
factors can be accessed via the CFACT data center. For more information see the
Data Center section of the MEPS Web site at
meps.ahrq.gov/data_stats/onsite_datacenter.jsp.
If examining trends in MEPS expenditures, please refer to Section C, sub-Section
3.3 for more information.
Return To Table Of Contents
The general methodology used for editing and imputing
expenditure data is described below. The MPC did not include either the dental
events or other medical expenditures (such as glasses, contact lenses, and
hearing devices). Therefore, although the general procedures remain the same for
dental and other medical expenditures, editing and imputation methodologies were
applied only to household-reported data. Please see below for details on the
differences between these editing/imputation methodologies. Separate imputations
were performed for flat fee and simple events, as well.
Return To Table Of Contents
Logical edits were used to resolve internal
inconsistencies and other problems in the HC survey-reported data. The edits
were designed to preserve partial payment data from households and providers,
and to identify actual and potential sources of payment for each
household-reported event. In general, these edits accounted for outliers,
copayments or charges reported as total payments, and reimbursed amounts that
were reported as out-of-pocket payments. In addition, edits were implemented to
correct for misclassifications between Medicare and Medicaid, and between
Medicare HMOs and private HMOs as payment sources. These edits produced a
complete vector of expenditures for some events, and provided the starting point
for imputing missing expenditures in the remaining events.
Return To Table Of Contents
The predicted mean matching imputation method was used
to impute missing expenditures. This procedure uses regression models (based on
events with completely reported expenditure data) to predict total expenses for
each event. Then, for each event with missing payment information, a donor event
with the closest predicted payment with the same pattern of expected payment
sources as the event with the missing payment was used to impute the missing
payment value. The imputations for the flat fee events were carried out
separately from the simple events.
A weighted sequential hot-deck procedure was used to
impute the missing total charges. This procedure uses survey data from
respondents to replace missing data, while taking into account the persons’
weighted distribution in the imputation process.
Return To Table Of Contents
Expenditures on other medical equipment and services
were developed in a sequence of logical edits and imputations. The household
edits were used to correct obvious errors in the reporting of expenditures, and
to identify actual and potential sources of payments. Some of the edits were
global (i.e., applied to all events). Others were hierarchical and mutually
exclusive. One of the more important edits separated flat fee events from simple
events. This edit was necessary because groups of events covered by a flat fee
(i.e., a flat fee bundle) were edited and imputed separately from individual
events each covered by a single charge (i.e., simple events). Other medical
services were imputed as flat fee events if the charges covered a package of
health care services (e.g., optical), and all of the services were part of the
same event type (i.e., a pure bundle). If a bundle contained any OM events with
any other types of events, the services were treated as simple events in the
imputations (See Section 2.5.3 for more detail on the definition and imputation
of events in flat fee bundles.)
Logical edits were used to sort each event into a
specific category for the imputations. Events with complete expenditures were
flagged as potential donors for the predictive mean imputations, while events
with missing expenditure data were assigned to various recipient categories.
Each event with missing expenditure data was assigned to a recipient category
based on the extent of its missing charge and expenditure data. For example, an
event with a known total charge but no expenditure information was assigned to
one category, while an event with a known total charge and partial expenditure
information was assigned to a different category. Similarly, events without a
known total charge and no or partial expenditure information were assigned to
various recipient categories.
The logical edits produced nine recipient categories
for events with missing data. Eight of the categories were for events with a
common pattern of missing data and a primary payer other than Medicaid. Medicaid
events were imputed separately because persons on Medicaid rarely know the
provider’s charge for services or the amount paid by the state Medicaid program.
As a result, the total charge for Medicaid-covered services was imputed and
discounted to reflect the amount that a state program might pay for the care.
Separate predictive mean imputations were used to
impute missing data in each of the eight recipient categories. The donor pool
included “free events” because in some instances, providers are not paid for
their services. These events represent charity care, bad debt, provider failure
to bill, and third party payer restrictions on reimbursement in certain
circumstances. If free events were excluded from the donor pool, total
expenditures would be over-counted because the distribution of free events among
complete events (donors) is not represented among incomplete events
(recipients).
Return To Table Of Contents
IMPFLAG is a six-category variable that indicates if
the event contains complete Household Component (HC) or Medical Provider
Component (MPC) data, was fully or partially imputed, or was imputed in the
capitated imputation process (for OP and MV events only). The following list
identifies how the imputation flag is coded; the categories are mutually
exclusive.
IMPFLAG = 0 not eligible for imputation (includes
zeroed out and flat fee leaf events)
IMPFLAG = 1 complete HC data
IMPFLAG = 2 complete MPC data (not applicable to OM
events)
IMPFLAG = 3 fully imputed
IMPFLAG = 4 partially imputed
IMPFLAG = 5 complete MPC data through capitation
imputation (not applicable to OM events)
Return To Table Of Contents
The approach used to count expenditures for flat fees
was to place the expenditure on the first visit of the flat fee group. The
remaining visits have zero payments. Thus, if the first visit in the flat fee
group occurred prior to 2012, all of the events that occurred in 2012 will have
zero payments. Conversely, if the first event in the flat fee group occurred at
the end of 2012, the total expenditure for the entire flat fee group will be on
that event, regardless of the number of events it covered after 2012. See
Section 2.5.3 for details on the flat fee variables.
Return To Table Of Contents
Some respondents reported persons obtaining medical
items where the payments were zero. This could occur for several reasons
including (1) item or service was free, (2) bad debt was incurred, or (3) the
item was covered under a flat fee arrangement beginning in an earlier year. If
all of the medical events for a person fell into one of these categories, then
the total annual expenditures for that person would be zero.
Return To Table Of Contents
In addition to total expenditures, variables are
provided which itemize expenditures according to major source of payment
categories. These categories are:
- Out-of-pocket by User (self) or Family,
- Medicare,
- Medicaid,
- Private Insurance,
- Veterans Administration/CHAMPVA, excluding TRICARE,
- TRICARE,
- Other Federal Sources – includes Indian Health Service,
military treatment facilities, and other care by the federal
government,
- Other State and Local Source – includes community and
neighborhood clinics, state and local health departments, and
state programs other than Medicaid,
- Workers’ Compensation, and
- Other Unclassified Sources – includes sources such as
automobile, homeowner’s, and liability insurances, and other
miscellaneous or unknown sources.
Two additional source of payment
variables were created to classify payments for events with
apparent inconsistencies between insurance coverage and sources
of payment based on data collected in the survey. These
variables include:
- Other Private – any type of private insurance payments
reported for persons not reported to have any private health
insurance coverage during the year as defined in MEPS, and
- Other Public – Medicare/Medicaid payments reported for
persons who were not reported to be enrolled in the
Medicare/Medicaid program at any time during the year.
Though relatively small in magnitude, data
users/analysts should exercise caution when interpreting the expenditures
associated with these two additional sources of payment. While these payments
stem from apparent inconsistent responses to health insurance and source of
payment questions in the survey, some of these inconsistencies may have logical
explanations. For example, private insurance coverage in MEPS is defined as
having a major medical plan covering hospital and physician services. If a MEPS
sampled person did not have such coverage but had a single service type
insurance plan (e.g., dental insurance) that paid for a particular episode of
care, those payments may be classified as “other private.” Some of the “other
public” payments may stem from confusion between Medicaid and other state and
local programs or may be from persons who were not enrolled in Medicaid, but
were presumed eligible by a provider who ultimately received payments from the
public payer.
Return To Table Of Contents
Other medical expenditure data were obtained only
through the Household Component Survey. For cases with missing expenditure data,
other medical expenditures were imputed using the procedures described above.
OMSF12X – OMOT12X are the 12 sources of payment.
OMTC12X is the total charge, and OMXP12X is the sum of the 12 sources of payment
for the other medical expenditures. The 12 sources of payment are: self/family
(OMSF12X), Medicare (OMMR12X), Medicaid (OMMD12X), private insurance (OMPV12X),
Veterans Administration/CHAMPVA (OMVA12X), TRICARE (OMTR12X), other federal
sources (OMOF12X), state and local (non-federal) government sources (OMSL12X),
Workers’ Compensation (OMWC12X), other private insurance (OMOR12X), other public
insurance (OMOU12X), and other insurance (OMOT12X).
Return To Table Of Contents
Expenditure variables on the 2012 Other Medical event
file have been rounded to the nearest penny. Person-level expenditure
information released on the MEPS 2012 Full Year Consolidated File will be
rounded to the nearest dollar. It should be noted that using the MEPS event
files to create person-level totals will yield slightly different totals than
those found on the consolidated file. These differences are due to rounding
only. Moreover, in some instances, the number of persons having expenditures on
the event files for a particular source of payment may differ from the number of
persons with expenditures on the person-level expenditure file for that source
of payment. This difference is also an artifact of rounding only.
Return To Table Of Contents
3.1 Overview
There is a single full-year person-level weight
(PERWT12F) assigned to each record for each key, in-scope person who responded
to MEPS for the full period of time that he or she was in-scope during 2012. A
key person either was a member of a responding NHIS household at the time of
interview, or joined a family associated with such a household after being
out-of-scope at the time of the NHIS (the latter circumstance includes newborns
as well as those returning from military service, an institution, or residence
in a foreign country). A person is in-scope whenever he or she is a member of
the civilian non-institutionalized portion of the U.S. population.
Return To Table Of Contents
The person-level weight PERWT12F was developed in several stages. First, person-level weights for
Panel 16 and Panel 17 were created separately. The weighting process for each panel included adjustments for nonresponse
over time and calibration to independent population totals. The calibration was initially accomplished separately for
each panel by raking the corresponding sample weights for those in-scope at the end of the calendar year to Current
Population Survey (CPS) population estimates based on five variables. The five variables used in the establishment of
the initial person-level control figures were: census region (Northeast, Midwest, South, West); MSA status (MSA,
non-MSA); race/ethnicity (Hispanic; Black, non-Hispanic; Asian, non-Hispanic; and other); sex; and age. A 2012
composite weight was then formed by multiplying each weight from Panel 16 by the factor .49 and each weight from
Panel 17 by the factor .51. The choice of factors reflected the relative sample sizes of the two panels, helping to
limit the variance of estimates obtained from pooling the two samples. The composite weight was raked to the same set of
CPS-based control totals. When the poverty status information derived from income variables became available, a final
raking was undertaken on the previously established weight variable. Control totals were established using poverty status
(five categories: below poverty, from 100 to 125 percent of poverty, from 125 to 200 percent of poverty, from 200 to 400
percent of poverty, at least 400 percent of poverty), the other five variables previously used in the weight calibration,
as well as age categories cross-classified with categories associated with numbers of office-based visits and age
categories cross-classified with categories reflecting the number of prescribed medicines purchased.
Return To Table Of Contents
The person-level weight for MEPS Panel 16 was developed using the 2011 full year weight for an
individual as a “base” weight for survey participants present in 2011. For key, in-scope members who joined
an RU sometime in 2012 after being out-of-scope in 2011, the initially assigned person-level weight was the
corresponding 2011 family weight. The weighting process included an adjustment for person-level nonresponse over Rounds
4 and 5 as well as raking to population control totals for December 2012 for key, responding persons in-scope on
December 31, 2012. These control totals were derived by scaling back the population distribution obtained from the
March 2013 CPS to reflect the December 31, 2012 estimated population total (estimated based on Census projections for
January 1, 2013). Variables used for person-level raking included: census region (Northeast, Midwest, South, West); MSA
status (MSA, non-MSA); race/ethnicity (Hispanic; Black, non-Hispanic; Asian, non-Hispanic; and other); sex; and age.
(Poverty status is not included in this version of the MEPS full year database because of the time required to process
the income data collected and then assign persons to a poverty status category). The final weight for key, responding
persons who were not in-scope on December 31, 2012 but were in-scope earlier in the year was the person weight after the
nonresponse adjustment.
It may be noted that there were several features
to the MEPS sample design employed for Panel 16 reflected in the Panel
16 weight that differed from previous panels: a sampling domain associated with those with cancer; a partitioning
of the “Other” race/ethnicity sample domain into those who fully completed the NHIS survey and
those who only partially completed it; and a small experiment conducted in 11
PSUs, where some non respondents were subsampled for fielding purposes. More
details can be found in the MEPS PUF documentation for the 2012 Full Year Population Characteristics File (HC-149).
Return To Table Of Contents
The person-level weight for MEPS Panel 17 was
developed using the 2012 MEPS Round 1 person-level weight as a “base” weight.
For key, in-scope members who joined an RU after Round 1, the Round 1 family
weight served as a “base” weight. The weighting process included an adjustment
for nonresponse over the remaining data collection rounds in 2012 as well as
raking to the same population control figures for December 2012 used for the
MEPS Panel 16 weights for key, responding persons in-scope on December 31, 2012.
The same five variables employed for Panel 16 raking (census region, MSA status,
race/ethnicity, sex, and age) were used for Panel 17 raking. Again, the final
weight for key, responding persons who were not in-scope on December 31, 2012
but were in-scope earlier in the year was the person weight after the
nonresponse adjustment.
Note that the MEPS Round 1 weights for both panels
incorporated the following components: a weight reflecting the original
household probability of selection for the NHIS and an adjustment for NHIS
nonresponse; a factor representing the proportion of the 16 NHIS panel-quarter
combinations eligible for MEPS; the oversampling of certain subgroups for MEPS
among the NHIS household respondents eligible for MEPS; ratio-adjustment to
NHIS-based national population estimates at the household (occupied DU) level;
adjustment for nonresponse at the DU level for Round 1; and poststratification
to U.S. civilian non institutionalized population estimates at the family and
person level obtained from the March CPS.
While most of the new Panel 16 design features were not retained for Panel 17, the partitioning of
the “Other” race/ethnicity domain into domains reflecting NHIS “full completes” and
“partial completes” was retained.
Return To Table Of Contents
The final raking of those in-scope at the end of the year has been described above. In addition,
the composite weights of two groups of persons who were out-of-scope on December 31, 2012 were poststratified.
Specifically, the weights of those who were in-scope some time during the year, out-of-scope on December 31, and entered
a nursing home during the year were poststratified to a corresponding control total obtained from the 1996 MEPS Nursing
Home Component. The weights of persons who died while in-scope during 2012 were poststratified to corresponding
estimates derived using data obtained from the Medicare Current Beneficiary Survey (MCBS) and Vital Statistics
information provided by the National Center for Health Statistics (NCHS). Separate decedent control totals were
developed for the “65 and older” and “under 65” civilian noninstitutionalized decedent
populations.
In developing the final person-level weight for 2012 (PERWT12F), two raking dimensions were added.
One reflected the MEPS 2009-2011 estimated average annual distribution of office-based visits by age (under 65, 65 and
over) while the other reflected the MEPS 2009-2011 estimated average distribution of prescription medicine purchases,
also by the same age groups. These additional adjustments were included to better reflect benchmark trends for these
two measures of health care utilization.
For each category of the additional two raking dimensions, the tables below show the ratio of the
weighted estimate of persons that resulted from including the additional raking dimension to the weighted estimate of
persons without the additional dimension.
Ratio of Adjusted to Unadjusted Weights for Office-based Raking Dimension
Number of Office-based Visits |
Under 65 (AGE12X < 65) |
65 or Older (AGE12X ≥ 65) |
0 |
0.87188 |
0.95404 |
1 - 5 |
1.03549 |
0.94513 |
6 - 10 |
1.12561 |
0.99076 |
> 10 |
1.16699 |
1.09270 |
Ratio of Adjusted to Unadjusted Weights for Prescribed Medicine Raking Dimension
Number of Prescribed Medicine Purchases |
Under 65 (AGE12X < 65) |
65 or Older (AGE12X ≥ 65) |
0 |
0.91674 |
0.89169 |
> 0 |
1.07082 |
1.01080 |
Overall, the weighted population estimate for the
civilian non-institutionalized population for December 31, 2012 is 309,875,841
(PERWT12F>0 and INSC1231=1). The sum of the person-level weights across all
persons assigned a positive person-level weight is 313,489,853.
Return To Table Of Contents
The target population for MEPS in this file is the
2012 U.S. civilian noninstitutionalized population. However, the MEPS sampled
households are a subsample of the NHIS households interviewed in 2010 (Panel 16)
and 2011 (Panel 17). New households created after the NHIS interviews for the
respective Panels and consisting exclusively of persons who entered the target
population after 2010 (Panel 16) or after 2011 (Panel 17) are not covered by
MEPS. Neither are previously out-of-scope persons who join an existing household
but are unrelated to the current household residents. Persons not covered by a
given MEPS panel thus include some members of the following groups: immigrants;
persons leaving the military; U.S. citizens returning from residence in another
country; and persons leaving institutions. The set of uncovered persons
constitutes only a small segment of the MEPS target population.
Return To Table Of Contents
MEPS began in 1996, and the utility of the survey for
analyzing health care trends expands with each additional year of data. However,
it is important to consider a variety of factors when examining trends over time
using MEPS. Statistical significance tests should be conducted to assess the
likelihood that observed trends may be attributable to sampling variation. The
length of time being analyzed should also be considered. In particular, large
shifts in survey estimates over short periods of time (e.g. from one year to the
next) that are statistically significant should be interpreted with caution,
unless they are attributable to known factors such as changes in public policy,
economic conditions, or MEPS survey methodology. Looking at changes over longer
periods of time can provide a more complete picture of underlying trends.
Analysts may wish to consider using techniques to evaluate, smooth, or stabilize
analyses of trends using MEPS data such as comparing pooled time periods (e.g.
1996-97 versus 2011-12), working with moving averages, or using modeling
techniques with several consecutive years of MEPS data to test the fit of
specified patterns over time. Moreover, analyses of trends in health care
utilization should be undertaken with awareness of relevant adjustments to the
analytic weight (e.g., see section 3.2.3 on the Final Person-Level Weight for
2012). Finally, researchers should be aware of the
impact of multiple comparisons on Type I error. Without making appropriate
allowance for multiple comparisons, undertaking numerous statistical
significance tests of trends increases the likelihood of concluding that a
change has taken place when one has not.
Return To Table Of Contents
This file is constructed for estimation of
utilization, expenditures, and sources of payment for other medical expenditures
and to allow for estimates for the number of persons who obtained medical items
in 2012.
Return To Table Of Contents
In contrast to the other types of event files, the
unit and/or period of time covered are not consistent across all records within
this file. More specifically, this file contains round-specific expenditure data
on purchases of eyeglasses or contact lenses and annual data on certain other
types of medical equipment, supplies, and services (see description below and
OMTYPEX variable in codebook for more details). Data are not collected on the
actual number of purchases of the items/services represented on this file, so it
is not possible to estimate the average expenditure per unit of service.
Return To Table Of Contents
Records for purchases of insulin and diabetic supplies
were included in the Other Medical Expenses event files for 1996-2004. Beginning
with the 2005 file, these records were excluded from the Other Medical Expenses
event file since the expenditures have always been included on the Prescribed
Medicines file. The Prescribed Medicines file is a more appropriate source for
estimates of both utilization and expenditures for insulin and diabetic
supplies. As a consequence, there are no records on this file where the variable
OMTYPEX = 2 or 3 (the values used in 1996-2004 to identify records for purchases
of insulin and diabetic supplies, respectively).
Eyeglasses and contact lenses: Each record on this
file where OMTYPEX = 1 contains information on total expenditures during a
specific round for eyeglasses and/or contact lenses (a maximum of 3 records for
a sample person). Variables for annual expenditure data for eyeglasses/contact
lenses (obtained by cumulating across round specific data in this file) are
included on the annual Full-Year Consolidated File.
Other medical equipment, supplies and services:
Each of the records in this file where OMTYPEX does not equal 1 contains
person-specific information on annual expenditures for a specific category of
medical equipment and supplies asked about in the survey. Estimates of the total
number of persons with expenditures for an item during the year are the sum of
the weight variable (PERWT12F) across relevant records (e.g., for ambulance
services, records where OMTYPEX = 4). Estimates of expenditure variables must be
weighted by PERWT12F to be nationally representative. For example, the estimate
for the total expenditures for ambulance services paid out of pocket is produced
by summing the product of the variables PERWT12F and OMSF12X across all the
events in the file where OMTYPEX = 4 as follows (the subscript ‘j’ identifies
each event and represents a numbering of events from 1 through the total number
of events in the file):
Σ Wj Xj,
where
Wj = PERWT12Fj (full-year weight for the person associated with event j) and
Xj = OMSF12Xj (amount paid by
self/family for event j) where OMTYPEX = 4.
The estimate for the total annual expenditures for
ambulance services paid out of pocket per person with that type of expense is
produced as follows (the subscript ‘j’ identifies each event and represents a
numbering of events from 1 through the total number of events in the file):
Σ Wj Xj /Σ Wj, where
Wj = PERWT12Fj (full-year weight
for the person associated with event j) and
Xj = OMSF12Xj (amount paid by self/family for event j) where OMTYPEX = 4.
This type of estimate and corresponding standard error
(SE) can be derived using an appropriate computer software package for complex
survey analysis such as SAS, Stata, SUDAAN or SPSS (meps.ahrq.gov/survey_comp/standard_errors.jsp).
Variables are contained on the full-year annual file for aggregate expenditures
across all of these types of services/items (OMTYPEX = 4-11 or 91), but it is
necessary to use this file to produce an annual estimate for a specific category
of service. Small sample sizes make it advisable to pool multiple years of MEPS
data to produce statistically reliable estimates for some of the items.
Return To Table Of Contents
It is essential that the analyst examine all variables
for the presence of negative values used to represent missing values. For
continuous or discrete variables, where means or totals may be taken, it may be
necessary to set negative values to values appropriate to the analytic needs.
That is, the analyst should either impute a value or set the value to one that
will be interpreted as missing by the computing language used. For categorical
and dichotomous variables, the analyst may want to consider whether to recode or
impute a value for cases with negative values or whether to exclude or include
such cases in the numerator and/or denominator when calculating proportions.
Methodologies used for the editing/imputation of
expenditure variables (e.g., source of payment, flat fee, and zero expenditures)
are described in Section 2.5.5.2.
Return To Table Of Contents
The MEPS has a complex sample design. To obtain
estimates of variability (such as the standard error of sample estimates or
corresponding confidence intervals) for MEPS estimates, analysts need to take
into account the complex sample design of MEPS for both person-level and
family-level analyses. Several methodologies have been developed for estimating
standard errors for surveys with a complex sample design, including the
Taylor-series linearization method, balanced repeated replication, and jackknife
replication. Various software packages provide analysts with the capability of
implementing these methodologies. Replicate weights have not been developed for
the MEPS data. Instead, the variables needed to calculate appropriate standard
errors based on the Taylor-series linearization method are included on this file
as well as all other MEPS public use files. Software packages that permit the
use of the Taylor-series linearization method include SUDAAN, Stata, SAS
(version 8.2 and higher), and SPSS (version 12.0 and higher). For complete
information on the capabilities of each package, analysts should refer to the
corresponding software user documentation.
Using the Taylor-series linearization method, variance
estimation strata and the variance estimation PSUs within these strata must be
specified. The variables VARSTR and VARPSU on this MEPS data file serve to
identify the sampling strata and primary sampling units required by the variance
estimation programs. Specifying a “with replacement” design in one of the
previously mentioned computer software packages will provide estimated standard
errors appropriate for assessing the variability of MEPS survey estimates. It
should be noted that the number of degrees of freedom associated with estimates
of variability indicated by such a package may not appropriately reflect the
number available. For variables of interest distributed throughout the country
(and thus the MEPS sample PSUs), one can generally expect to have at least 100
degrees of freedom associated with the estimated standard errors for national
estimates based on this MEPS database.
Prior to 2002, MEPS variance strata and PSUs were
developed independently from year to year, and the last two characters of the
strata and PSU variable names denoted the year. However, beginning with the 2002
Point-in-Time PUF, the variance strata and PSUs were developed to be compatible
with all future PUFs until the NHIS design changed. Thus, when pooling data
across years 2002 through the Panel 11 component of the 2007 files, the variance
strata and PSU variables provided can be used without modification for variance
estimation purposes for estimates covering multiple years of data. There were
203 variance estimation strata, each stratum with either two or three variance
estimation PSUs.
From Panel 12 of the 2007 files, a new set of variance
strata and PSUs were developed because of the introduction of a new NHIS design.
There are 165 variance strata with either two or three variance estimation PSUs
per stratum, starting from Panel 12. Therefore, there are a total of 368
(203+165) variance strata in the 2007 Full Year file as it consists of two
panels that were selected under two independent NHIS sample designs. Since both
MEPS panels in the Full Year 2008 file and beyond are based on the new NHIS
design, there are only 165 variance strata. These variance strata (VARSTR
values) have been numbered from 1001 to 1165 so that they can be readily
distinguished from those developed under the former NHIS sample design in the
event that data are pooled for several years.
If analyses call for pooling MEPS data across several
years, in order to ensure that variance strata are identified appropriately for
variance estimation purposes, one can proceed as follows:
- When pooling any year from 2002 or later, one can use the
variance strata numbering as is.
- When pooling any year from 1996 to 2001 with any year from
2002 or later, use the H36 file.
- A new H36 file will be constructed in the future to allow
pooling of 2007 and later years with 1996 to 2006.
Return To Table Of Contents
Data from this file can be used alone or in
conjunction with other files for different analytic purposes. This section
summarizes various scenarios for merging/linking MEPS event files. Each MEPS
panel can also be linked back to the previous years’ National Health Interview
Survey public use data files. For information on obtaining MEPS/NHIS link files
please see
meps.ahrq.gov/data_stats/more_info_download_data_files.jsp.
Return To Table Of Contents
Merging characteristics of interest from other MEPS
files (e.g., 2012 Full-Year Consolidated File or 2012 Prescribed Medicines)
expands the scope of potential estimates. For example, to estimate the
expenditures for medical equipment, visual aids, etc. for persons with specific
demographic characteristics (such as age, race, and sex), population
characteristics from a person-level file need to be merged onto the Other
Medical Expenses event file. This procedure is shown below. The MEPS 2012
Appendix File, HC-152I, provides additional details on how to merge other MEPS
data files.
- Create data set PERSX by sorting the 2012 Full-Year
Consolidated File, by the person identifier, DUPERSID. Keep only
variables to be merged onto the other medical events file and
DUPERSID.
- Create data set OMEXP by sorting the other medical event
file by person identifier, DUPERSID.
- Create final data set NEWOME by merging these two files by
DUPERSID, keeping only records on the other medical event file.
The following is an example of SAS code which
completes these steps:
PROC SORT DATA=HCXXX (KEEP=DUPERSID AGE31X AGE42X
AGE53X SEX RACEV1X EDUCYR EDUYRDEG EDRECODE) OUT=PERSX;
BY DUPERSID;
RUN;
PROC SORT DATA=OMEXP;
BY DUPERSID;
RUN;
DATA NEWOME;
MERGE OMEXP (IN=A) PERSX (IN=B);
BY DUPERSID;
IF A;
RUN;
Return To Table Of Contents
The RXLK file provides a link from the MEPS event
files to the 2012 Prescribed Medicine Event File. When using RXLK, data
users/analysts should keep in mind that one other medical record can link to
more than one prescribed medicine record. Conversely, a prescribed medicine
event may link to more than one other medical record. When this occurs, it is up
to the data user/analyst to determine how the prescribed medicine expenditures
should be allocated among those medical events. For detailed linking examples,
including SAS code, data users/analysts should refer to the MEPS 2012 Appendix
File, HC-152I.
Return To Table Of Contents
Conditions data are not collected for Other Medical
events; therefore, this file cannot be linked to the Conditions File.
Return To Table Of Contents
Cohen, S.B. (1996). The Redesign of the Medical
Expenditure Panel Survey: A Component of the DHHS Survey Integration Plan.
Proceedings of the COPAFS Seminar on Statistical Methodology in the Public
Service.
Ezzati-Rice, T.M., Rohde, F., Greenblatt, J., Sample
Design of the Medical Expenditure Panel Survey Household Component, 1998–2007.
Methodology Report No. 22. March 2008. Agency for Healthcare Research and
Quality, Rockville, MD
Monheit, A.C., Wilson, R., and Arnett, III, R.H.
(Editors) (1999). Informing American Health Care Policy. Jossey-Bass Inc., San
Francisco.
Shah, B.V., Barnwell, B.G., Bieler, G.S., Boyle, K.E.,
Folsom, R.E., Lavange, L., Wheeless, S.C., and Williams, R. (1996). Technical
Manual: Statistical Methods and Algorithms Used in SUDAAN Release 7.0,
Research Triangle Park, NC: Research Triangle Institute.
Return To Table Of Contents
VARIABLE-SOURCE CROSSWALK
FOR MEPS HC-152C: 2012 OTHER MEDICAL EXPENSES
Survey Administration Variables
Variable |
Description |
Source |
DUID |
Dwelling unit ID |
Assigned in sampling |
PID |
Person number |
Assigned in sampling |
DUPERSID |
Person ID (DUID + PID) |
Assigned in sampling |
EVNTIDX |
Event ID |
Assigned in Sampling |
EVENTRN |
Event round number |
CAPI derived |
FFEEIDX |
Flat fee ID |
CAPI derived |
PANEL |
Panel number |
Constructed |
Return To Table Of Contents
Other Medical Events Variables
Variable |
Description |
Source |
OMTYPEX |
Other medical expense
type – edited |
EV03 (edited) |
OMTYPE |
Other medical expense
type |
EV03 |
OMOTHOX |
OMTYPE other specify –
edited |
EV03A (edited) |
OMOTHOS |
OMTYPE other specify |
EV03A |
Return To Table Of Contents
Flat Fee Variables
Variable |
Description |
Source |
FFOMTYPE |
Flat Fee Bundle |
Constructed |
FFBEF12 |
Total # of visits in
FF before 2012 |
FF05 |
FFTOT13 |
Total # of visits in
FF after 2012 |
FF10 |
Return To Table Of Contents
Imputed Expenditure Variables
Variable |
Description |
Source |
OMSF12X |
Amount paid, family
(Imputed) |
CP Section (Edited) |
OMMR12X |
Amount paid, Medicare
(Imputed) |
CP Section (Edited) |
OMMD12X |
Amount paid, Medicaid
(Imputed) |
CP Section (Edited) |
OMPV12X |
Amount paid, private
insurance (Imputed) |
CP Section (Edited) |
OMVA12X |
Amount paid, Veterans/CHAMPVA
(Imputed) |
CP Section (Edited) |
OMTR12X |
Amount paid, TRICARE
(Imputed) |
CP Section (Edited) |
OMOF12X |
Amount paid, other
federal (Imputed) |
CP Section (Edited) |
OMSL12X |
Amount paid, state &
local government (Imputed) |
CP Section (Edited) |
OMWC12X |
Amount paid, workers’
compensation (Imputed) |
CP Section (Edited) |
OMOR12X |
Amount paid, other private insurance (Imputed) |
Constructed |
OMOU12X |
Amount paid, other
public insurance (Imputed) |
Constructed |
OMOT12X |
Amount paid, other
insurance (Imputed) |
CP Section (Edited) |
OMXP12X |
Sum of OMSF12X–OMOT12X
(Imputed) |
Constructed |
OMTC12X |
Household reported
total charge (Imputed) |
CP Section (Edited) |
IMPFLAG |
Imputation status |
Constructed |
Return To Table Of Contents
Weights
Variable |
Description |
Source |
PERWT12F |
Expenditure file person weight, 2012 |
Constructed |
VARSTR |
Variance estimation stratum, 2012 |
Constructed |
VARPSU |
Variance estimation PSU, 2012 |
Constructed |
Return To Table Of Contents
|